Fender Lining
#1
Fender Lining
Is replacing the fender lining a DIY job? I have tabs on each side that are broken and I'm not able to seal up the well. I just put on my springs and lip and can see the dealer saying that the ride difference caused the tabs to break. Thoughts?
#3
Burning Brakes
I know this is really late, but yes, it is an easy DIY job. I did both sides. You do not have to remove the wheels or use jackstands or a lift. Piece of cake. I would order a few extra of the push clip things in case a few break on removal. There are two types of clips, and you need both. One is larger and has a metal sleeve in it, the other is all plastic and smaller.
The clip part numbers are:
91512-SX0-003
91505-S9A-003
If you lost the screws, the part number for those is:
90114-SE0-000
The clip part numbers are:
91512-SX0-003
91505-S9A-003
If you lost the screws, the part number for those is:
90114-SE0-000
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM